From: Jain, Rajeev - Contingent Staff (rajeev.jain.contractor@bcbsa.com)
Date: Thu Oct 02 2003 - 16:12:11 EDT
Just to a few more lines
We discovered that we ran out of licenses on our checkpoint firewall during
this testing.
We also see that 4 additional hosts are detected by the firewall
Can anyone think out of the box and consider that this might be the cause of
the issue?
Rajeev
-----Original Message-----
From: Jain, Rajeev - Contingent Staff
Sent: Thursday, October 02, 2003 12:27 PM
To: 'sunmanagers@sunmanagers.org'
Subject: question about maunal failover?
Managers,
I have a question about a test which I performed a few days
ago and failed
Considering that I have 2 boxes i.e. CC01 and CC02 with 2
(qfe0 and qfe3) interfaces running MQ Series
Here is what we have done
Shutdown MQ Series Server on CC01
Shutdown network interface (qfe0) and export the disk group
(cc01dg) on CC01
Import disk group (cc01dg) and replace network interface
(qfe3) on CC02
Start MQ Series server on CC02, test and verify MQ
Shutdown MQ Series server on CC02
Replace original settings of network interface (qfe3) and
export disk group (cc01dg) on CC02
Import disk group (cc01dg) and start network interface
(qfe0) with original settings on CC01
Start MQ Series server, test and verify MQ
Shutdown MQ Series Server on CC02
Backup MQ Application and Data to a file system for
immediate restore
Shutdown network interface (qfe0) and export the disk group
(cc02dg) on CC02
Import disk group (cc02dg) and replace network interface
(qfe3) on CC01
Start MQ Series server on CC01, test and verify MQ
Shutdown MQ Series server on CC01
Replace original settings of network interface (qfe3) and
export disk group (cc02dg) on CC01
Import disk group (cc02dg) and start network interface
(qfe0) with original settings on CC02
Start MQ Series server, test and verify MQ
After all these steps my MQ series administrator confirmed
that MQ Series is working OK
After about 9 hours we realized that CC01 was accepting
connection but was failing to send connection out
We brought down qfe3 and everything started working fine.
Is there anything outside the box which could have caused
the issue?
I would really appreciate any suggestion and answer
Rajeev
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:14 EDT