Adding X6541A to Solaris 8 on an E220R.

From: Lewars, Mitchell (EM, PTL) (Mitchell.Lewars@penske.com)
Date: Wed Oct 01 2003 - 11:14:37 EDT

• Next message: Garrett, Matt M SITI-ITDIEEE: "openssl Vulnerabilities in ASN.1 parsing"
• Previous message: Mike Myers: "Summary: Fwd: Re: Sun Cross Reference List"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

We have installed a X6541A Dual Differential SCSI adapter into our E220R
running Solaris 8.

This will be used to control a Sun StoreEdge L1800.

At the OK prompt, all is well:

ok probe-scsi-all
/pci@1f,4000/scsi@5,1

/pci@1f,4000/scsi@5
Target 0
  Unit 0 Removable Device type 8 ATL ACL4/52 62100902.34
Target 2
  Unit 0 Removable Tape QUANTUM DLT7000 1E48
Target 3
  Unit 0 Removable Tape QUANTUM DLT7000 245F

/pci@1f,4000/scsi@3,1

/pci@1f,4000/scsi@3
Target 0
  Unit 0 Disk SEAGATE ST318404LSUN18G 4207
Target 1
  Unit 0 Disk SEAGATE ST318404LSUN18G 4207
Target 6
  Unit 0 Removable Read Only device TOSHIBA XM6201TASUN32XCD1103

But, when I do a boot -r I do not get a device handle for the card or the
tape drives.

Help?

Mitchell Lewars
mitchell.lewars@penske.com
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

• Next message: Garrett, Matt M SITI-ITDIEEE: "openssl Vulnerabilities in ASN.1 parsing"
• Previous message: Mike Myers: "Summary: Fwd: Re: Sun Cross Reference List"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:13 EDT