From: Sriman Kumaran (sriman_kumaran@yahoo.co.uk)
Date: Mon Sep 29 2003 - 22:16:03 EDT
Hi Mangaers,
I have 2 disks in my Ultra10 as shown here:
Inside system in format command:
0. c0t0d0 <Seagate Medalist 34342A cyl 8892 alt 2 hd 15 sec 63>
/pci@1f,0/pci@1,1/ide@3/dad@0,0
1. c0t2d0 <ST340014A cyl 65529 alt 2 hd 16 sec 63>
/pci@1f,0/pci@1,1/ide@3/dad@2,0
and at the OK prompt
ok probe-ide
Device 0 ( Primary Master )
ATA Model: ST34342A
Device 1 ( Primary Slave )
Not Present
Device 2 ( Secondary Master )
ATA Model: ST340014A
Device 3 ( Secondary Slave )
Removable ATAPI Model: CRD-8240B
My current boot disk is disk0 as:
disk0 /pci@1f,0/pci@1,1/ide@3/disk@0,0
booting from disk0 is fine, but when I want to boot from the second disk I can't . This is what I have done so far:
1. ufsdump of c0t0d0s0 and ufsrestore to c0t2d0s0
2. Installed the boot block on c0t2d0s0.
3. Created a devalias at ok prompt for my second disk as:
otherroot /pci@1f,0/pci@1,1/ide@3/dad@2,0
after reset and run
boot otherroot
I get the following error message:
Can't open boot device
Where am I making mistake?
Thanks for your help in advance.
Sriman
---------------------------------
Want to chat instantly with your online friends? Get the FREE Yahoo!Messenger
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:12 EDT