From: Matthew Harris (mharris@commander.com)
Date: Sun Sep 28 2003 - 22:50:07 EDT
> Greetings,
>
> We have a e4500 Server running Solaris 8 that has dual nics...
>
> NIC1: GE0
> NIC2: HME0
>
> I had setup multipathing to fail from the GE0 -> HME0. This worked
perfectly, until we had a router failure the other day.
>
> The machine dropped off the network because both interfaces could not reach
the router. To prevent this from happening again, I want to configure GE0 to
probe the switch it is plugged into and HME0 the other switch. Ge0 is on
switch 172.24.24.10 and hme0 is on 172.24.24.12
>
> How can this be done?
>
> hostname.ge0
> ~~~~~~~~~~
> pisces_ge netmask + broadcast + \
> group production deprecated -failover up \
> addif pisces netmask + broadcast + failover up
>
> hostname.hme0
> ~~~~~~~~~~~~
> pisces_ge netmask + broadcast + \
> group production deprecated -failover up \
> addif pisces netmask + broadcast + failover up
>
> /etc/hosts
> ~~~~~~~
> 172.24.24.54 pisces pisces.commander.com loghost
> 172.24.24.154 pisces_ge pisces_ge.commander.com
> 172.24.24.155 pisces_eth pisces_eth.commander.com
>
> Thanks in advance.
>
> Matthew Harris
> ___________________________________________
> Commander Australia Ltd. Tel: (03) 9698 6106
> 100 Dorcas St mharris@commander.com
> Sth Melbourne, Vic 3205
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:12 EDT