From: Todd Kennedy (Todd.Kennedy@crc.net)
Date: Tue Sep 23 2003 - 17:01:53 EDT
Everytime I try to boot this Sun e250 box it keeps locking up loading a
device. Here is the output of doing a boot cdrom -sv
Type 'go' to resume
{0} ok boot cdrom -sv
Resetting ...
Can't open input device.
Keyboard not present. Using ttya for input and output.
Sun (TM) Enterprise 250 (2 X UltraSPARC-II 400MHz), No Keyboard
OpenBoot 3.16, 2048 MB memory installed, Serial #15108380.
Ethernet address 8:0:20:e6:89:1c, Host ID: 80e6891c.
Rebooting with command: boot cdrom -sv
Boot device: /pci@1f,4000/scsi@3/disk@6,0:f File and args: -sv
Size: 344496+88281+61647 Bytes
SunOS Release 5.8 Version Generic_108528-01 64-bit
Copyright 1983-2000 Sun Microsystems, Inc. All rights reserved.
Ethernet address = 8:0:20:e6:89:1c
Using default device instance data
mem = 2097152K (0x80000000)
avail mem = 2064031744
root nexus = Sun (TM) Enterprise 250 (2 X UltraSPARC-II 400MHz)
pcipsy0 at root: UPA 0x1f 0x4000
pcipsy0 is /pci@1f,4000
pcipsy1 at root: UPA 0x1f 0x2000
pcipsy1 is /pci@1f,2000
/pci@1f,4000/scsi@3 (glm0):
Rev. 5 Symbios 53c875 found.
/pci@1f,4000/scsi@3 (glm0):
target1-scsi-options=0x5f8
/pci@1f,4000/scsi@3 (glm0):
target2-scsi-options=0x5f8
/pci@1f,4000/scsi@3 (glm0):
target3-scsi-options=0x5f8
/pci@1f,4000/scsi@3 (glm0):
target4-scsi-options=0x5f8
/pci@1f,4000/scsi@3 (glm0):
target5-scsi-options=0x5f8
/pci@1f,4000/scsi@3 (glm0):
target6-scsi-options=0x5f8
PCI-device: scsi@3, glm0
glm0 is /pci@1f,4000/scsi@3
/pci@1f,4000/scsi@3,1 (glm1):
Rev. 5 Symbios 53c875 found.
PCI-device: scsi@3,1, glm1
glm1 is /pci@1f,4000/scsi@3,1
sd0 at glm0: target 0 lun 0
sd0 is /pci@1f,4000/scsi@3/sd@0,0
<SUN18G cyl 7506 alt 2 hd 19 sec 248>
sd6 at glm0: target 6 lun 0
sd6 is /pci@1f,4000/scsi@3/sd@6,0
sd7 at glm0: target 8 lun 0
sd7 is /pci@1f,4000/scsi@3/sd@8,0
<Symbios-StorEDGEA1000-0205 cyl 8615 alt 2 hd 64 sec 64>
sd8 at glm0: target 9 lun 0
sd8 is /pci@1f,4000/scsi@3/sd@9,0
<SUN9.0G cyl 4924 alt 2 hd 27 sec 133>
sd9 at glm0: target a lun 0
sd9 is /pci@1f,4000/scsi@3/sd@a,0
<SUN18G cyl 7506 alt 2 hd 19 sec 248>
sd10 at glm0: target b lun 0
sd10 is /pci@1f,4000/scsi@3/sd@b,0
<Symbios-StorEDGEA1000-0205 cyl 8615 alt 2 hd 64 sec 64>
sd11 at glm0: target c lun 0
sd11 is /pci@1f,4000/scsi@3/sd@c,0
<Symbios-StorEDGEA1000-0205 cyl 8615 alt 2 hd 64 sec 64>
root on /pci@1f,4000/scsi@3/disk@6,0:b fstype ufs
PCI-device: ebus@1, ebus0
envctrltwo0 at ebus0: offset 14,600000
envctrltwo0 is /pci@1f,4000/ebus@1/SUNW,envctrltwo@14,600000
su0 at ebus0: offset 14,3083f8
su0 is /pci@1f,4000/ebus@1/su@14,3083f8
su1 at ebus0: offset 14,3062f8
su1 is /pci@1f,4000/ebus@1/su@14,3062f8
se0 at ebus0: offset 14,400000
se0 is /pci@1f,4000/ebus@1/se@14,400000
se1 at ebus0: offset 14,200000
~e1 is /pci@1f,4000/ebus@1/se@14,200000
--------------------------------------------------------------------End of
Boot sequence ------------------------------------------
If you notice the very last line there is a funky character right at the
beginning. It should say se1 but instead it says ~e1.
After this entry the server does boot any further and only responds to a
stop-A.
How can I troubleshoot this any further to know what is the problem?
Any help is much appriciated.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:10 EDT