From: Levi Ashcol (leviashcol@hotpop.com)
Date: Tue Sep 23 2003 - 14:21:08 EDT
Well,
I did not know what happened ! My problem is that after the "attached
to port 2" phrase, the characters appeared crazy ! I just copied and
paste the text to my mailer and send it to the list ! When I saw my
email everything appears normal !! Anyway if this happened before to
anyone on the list please share how did you solve the problem.
Thanks
IWS
Levi
-----Original Message-----
From: sunmanagers-bounces@sunmanagers.org
[mailto:sunmanagers-bounces@sunmanagers.org] On Behalf Of Levi Ashcol
Sent: Tuesday, September 23, 2003 12:16 AM
To: sunmanagers@sunmanagers.org
Subject: Annex Switch Terminal configuration !
Hi Gurus,
May be this is slightly off topic, but I hope someone can help.
I am using Annex switch to connect to 3910 service processor.
I did it once and successfully connected to the V120 Service processor.
I typed stty sane and then the problem below started !
The terminal became insane indeed !
# telnet 10.10.10.10
Trying 10.10.10.10...
Connected to 10.10.10.10
Escape character is '^]'.
Rotaries Defined:
cli -
Enter Annex port name or number: 2
Attached to port 2
Sun Microsystems Inc. NWS Service Processor Revision 2.1.1 May 23,
2002msp0: root# :17:13 msp0 login: ROOT LOGIN /dev/console
Any help ?
IWS
Levi
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:10 EDT