From: Vahid Moghaddasi (sunman@ureach.com)
Date: Mon Sep 15 2003 - 15:10:20 EDT
Thanks to everyone who replied:
Claude Charest
Jason Santos
Johan Hartzenberg
Eugene Schmidt
joe fletcher
Matthew Stier
Jeff Woolsey
I have received different answers, some say it will not work,
some say must cross the fiber cables to work and some say to
just connect them and it will work.
I will try the two later ways since I know it should work.
Thank you,
Vahid.
________________________________________________
Get your own "800" number
Voicemail, fax, email, and a lot more
http://www.ureach.com/reg/tag
---- Vahid Moghaddasi sunman@ureach.com wrote ----
> Date: Tue, 9 Sep 2003 18:46:12 -0400
> To: " Sun-Managers" <sunmanagers@sunmanagers.org>
> From: Vahid Moghaddasi <sunman@ureach.com>
> Subject: peer-to-peer fiber connection
> Reply-To: sunman@ureach.com
>
>
> Hi everyone,
> We are migrating from E6500 to E15K and need a fast way to
move
> the data from the old machine to the new one. There is about
> 600GB+ of oracle database.
> Both systems have Gigabit Ethernet card and was wondering if
it
> is possible to connect the peer-to-peer without a switch or
hub,
> the same way as crossed copper wire.
> Thank you and I will summarize,
> Vahid.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:07 EDT