From: Adrian Phipps (AC) (PhippsAC@telkom.co.za)
Date: Sun Sep 14 2003 - 04:16:12 EDT
Hi all,
Quick question, I recently setup IPMP on my 15K's system controllers,
SC0 and SC1. This was done to my knowledge correctly. Then I had to
update firmware on the system boards and for this to take effect the
boards had to be powered off and powered on again. (setkeyswitch -d
domainname off)
I setkeyed Domain A and it failed it's POST with a ecode=9 error, MAN
network not working. I then removed the IPMP by unconfiguring
interface ERI1 on both SC's, now the setkey is working fine and the
POST goes through without any errors.
Anybody heard of something similar? Please assist, I will summarize.
Adrian Phipps
90 Durban Road
IT Building
Bellville
Work 021-949 4642
Cell 082 787 7321
Fax 021-945 4740
<<Picture (Metafile)>>
[demime 1.01b removed an attachment of type image/bmp which had a name of ole0.bmp]
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:06 EDT