From: rmck (rmckeever@earthlink.net)
Date: Wed Sep 03 2003 - 14:02:47 EDT
Hello,
I have an external scsi hd that is 9 gb that I use to boot off of my U5's for cloning.
On this system I installed an internal 80 drive. Booted off of the 9gb drive fine, did format and labled the new 80 drive.
Usually I create the slices and ufsdump on the new disk. But this time I tried dd.
# dd if=/dev/rdsk/c0t1d0s2 of=/dev/rdsk/c0t0d0s2 bs=4096k
now when I do format it shows the drives the same:
AVAILABLE DISK SELECTIONS:
(Should be Western digitial)
0. c0t0d0 <IBM cyl 11482 alt 2 hd 5 sec 312>
/pci@1f,0/pci@1,1/ide@3/dad@0,0
1. c1t2d0 <IBM cyl 11482 alt 2 hd 5 sec 312>
/pci@1f,0/pci@1/pci@1/SUNW,isptwo@4/sd@2,0
Specify disk (enter its number):
Am I hosed?? Is there a way I get get the drive c0t0d0 to be seen as the Western digitial again???
Rob
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:04 EDT