Unable to see A1000

From: Bob Barkhymer (barkhymr@nosc.mil)
Date: Wed Sep 03 2003 - 09:44:58 EDT

• Next message: Franky: "SUMMARY: a1000 problem"
• Previous message: Sujit Choudhury: "The command lp only print one copy"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Good Morning Sunmanagers,

We have a R420 SUN Server with an A1000 Array. After boot up we are unable
to see the array and we receive the following message.
"/usr/lib/osa/bin/arraymon: No RAID devices found to check". We tried both
Solaris 2.6 and Solaris 8 and get the same message. A boot -r was also
performed. We have RAID Manager Version 06.01.01.11. When performing
probe-scsi-all we can see the RAID. We replaced the controller board which
did not help. Any suggestions?

Thanks,

Bob
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

• Next message: Franky: "SUMMARY: a1000 problem"
• Previous message: Sujit Choudhury: "The command lp only print one copy"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:04 EDT