From: Franky Van Liedekerke (liedekef@pandora.be)
Date: Thu Aug 21 2003 - 09:14:15 EDT
Hi,
I'm trying to get my E250 solaris 8 machine to talk to an old a1000
which was lying around here. After installing the latest recommended
patches, the 6.221 raid manager and some small patches (112126-06) and ,
I rebooted the machine and it recognized the A1000. Whoohoo!
But then it happened: the firmware needed to be upgraded, so I started
the fwutil command, but because I'm a bit blnd I did
fwutil 02050632.apd c1t5d0
instead of
fwutil 02050632.bwd c1t5d0
The command frooze on me and there was nothing else I could do but
reboot the machine and A1000 because the tools (like raidutil) no longer
were able to talk to the A1000.
But now the A1000 is no longer recognized by the machine:
# ./nvutil -v
There are no devices (controllers) in the system; nvutil terminated.
# ./hot_add
drvconfig: driver failed to attach: ssd
WARNING: set_drivers: No arrays were found that are controlled by either
the sd or the ssd driver
So you see I could use a little help here ...
Did I screw up my firmware controller? Do I need to install patch
106503-08? I was reluctant to do this one because it's a flash upgrade
of the system, but maybe it needs this?
any help is appreciated ...
Franky
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:58 EDT