From: Hackett, Peter (PHackett@talisman-energy.com)
Date: Thu Aug 14 2003 - 17:49:20 EDT
Sunmanagers,
I've got a Blade 2000 w/Sol 8 with a XVR-1000 and XVR-1200 accelerators.
Is it supported / possible to run Xinerama across these two accelerators? I
can run Xinerama across two XVR-1000's without problems, but not sure about
this combination.
The XVR-1200 guide states as a restriction:
"Two screens must have save visuals to be combined using Xinerama. In
practice, this means they must be the same device (family)."
Does this mean that it's not supported being that the XVR-1000 is
/dev/fbs/gfb0 and the XVR-1200 is /dev/fbs/jfb0 ?
Am I out of luck here?
Peter.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:56 EDT