From: Polak, Jon (Jon_Polak@icgcomm.com)
Date: Tue Aug 12 2003 - 13:05:07 EDT
for the wizards...
General question...
I have several netra20, 1120 & 1400 units that I need to know exact memory
configurations without physical access to the box. These units are in 24x7
production and connot be taken out of service easily to unrack & open to
check the configuration.
Is there a way to remotely determine what memory slots are being used? The
prtdiag command only shows total memory installed. I need some way to
determine just what slots, i.e. j0404, j0405...that are filled. Is there a
diagnostic available that will provide this data or can you recommend how to
accomplish this remotely. Note, we do have remote console access to the box
in the event the boot prom can provide the data through POST diagnostics,
however it would be vastly preferred to do it without rebooting the box.
Thanks in advance
Jon
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:55 EDT