From: sunguy@cyrion.net
Date: Mon Aug 11 2003 - 08:57:02 EDT
I have a Qlogic 64bit PCI dual fc-al adapter with chipset QLC ISP200A. I
have 3 420's (running solaris 8 108528-23) with 2 of these in each of
them. None of these machines can see the multi-pathed arrays (A5000's)
attached to them.
The following is relevent info from prtdiag -v on all of these boxes.
Machine 1:
0 PCI 33 PCI 3 scsi-pci1077,2200.1028.2.5
0 PCI 33 PCI 2 scsi-pci1077,2200.1028.2.5
Machine 2:
0 PCI 33 PCI 3 scsi-pci1077,2200.1028.2.5
0 PCI 33 PCI 2 scsi-pci1077,2200.1028.2.5
Machine 3:
0 PCI 33 PCI 3 SUNW,qlc-pci1077,2200.1077.4082.+
0 PCI 33 PCI 2 scsi-pci1077,2200.1028.2.5
I have downloaded and tried to apply the following:
Patch-ID# 111853-01
Keywords: ISP2200A PCI FibreChannel adapter firmware FCode x6748A x6727A
x6799A
Synopsis: Hardware/FCode: PCI Single/Dual FC Network Adapter
Date: Aug/31/2001
However when I run the update I only see this:
Found Path to 0 FC100/P, ISP2200 Devices
Complete
Can someone point me in the right direction here?
Is there something I'm missing, or another path I should be investigating?
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:55 EDT