From: Donovan, Jeffrey (Jeff), ALABS (jmd@att.com)
Date: Thu Aug 07 2003 - 22:23:56 EDT
Hi,
I am jumpstarting several E15k domains. The interface on the domains is not
the one specified by the net devalias, therefore I create a "jumpnet" devalias
at the OBP prompt which points to the correct interface and then I do a boot
jumpnet - install. This works fine. Problem is that in my finish scripts I
have to set up my bootdisk alias via the eeprom command by doing a ls -l on
the /dev/dsk/c?t?t?d? and getting the physical device path which also works
fine.
However when I set nvramrc to true and then create the bootdisk devalias and
reboot my jumpnet devalias I set at the OBP prompt is gone. Is there a way to
append to the nvram via eeprom command so my jumpnet alias remains intact. Or
is there a way to determine the actual hardware path like I do for the
bootdisk since I know the interface comes up as ce0?
Thanks
Jeff
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:54 EDT