From: Tim Hespe (t.hespe@unsw.edu.au)
Date: Tue Aug 05 2003 - 21:50:06 EDT
Hi,
I have a DLT8000 that is performing badly. To verify that the drive was the problem
I swapped the drive from another machine and confirmed that the drive was the problem.
I have moved the original drive back. I issued an "mt status" command on the drive but the mt command
won't complete. I can't kill the process and can't do anything with the drive. When swapping I did not
take the precaution of unloading the st module which I probably should have. I can't unload the st module now because
it is in use. Is there any way to recover from this without rebooting?
Thanks,
Tim Hespe
System Admin.
University of New South Wales Library
t.hespe@unsw.edu.au
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:52 EDT