Ultrium-1 w/420R connection problem

From: knoxth@cch.com
Date: Mon Aug 04 2003 - 16:02:39 EDT


Hello,

I have a Sun E420R (4x450, 4GB RAM) running Solaris 9 04/03 (112233-07).
Installed is a Sun dual port LVD SCSI PCI card, which shows up under
prtdiag as:

0 PCI 33 PCI 3 pci-pci8086,b154.0/scsi (scs+ pci-bridge
0 PCI 33 PCI 3 scsi-pci1077,1016/sd (block) QLGC,ISP10160
0 PCI 33 PCI 3 scsi-pci1077,1016/sd (block) QLGC,ISP10160

If I drop to the firmware and do:
ok reset-all
...
ok probe-scsi-all
...
/pci@1f,4000/pci@2/scsi@4
Target 4
  Unit 0 Removable Tape IBM ULT3580-TD1 0CE1

My /kernel/drv/st.conf file has:
tape-config-list=
...
"IBM ULTRIUM-TD1", "IBM Ultrium", "CLASS_3580",
"IBM ULT3580-TD1", "IBM 3580 Ultrium", "CLASS_3580";
...
CLASS_3580 = 1, 0x24, 0, 0x45863d, 2, 0x00, 0x01, 0;
...
name="st" class="scsi" target=0 lun=0;
name="st" class="scsi" target=1 lun=0;
name="st" class="scsi" target=2 lun=0;
name="st" class="scsi" target=3 lun=0;
name="st" class="scsi" target=4 lun=0;
...

Patch 113033-03 is installed.

I cannot see the tape drive from Solaris. When I do a "boot -r" from the
ok prompt, it does not find the drive. /dev/rmt is empty.

Does anyone have any suggestions? Thanks!

Thomas Knox
UberAdmin, Technology Services
CCH INCORPORATED, A WoltersKluwer Company
2700 Lake Cook Road, Riverwoods, IL 60015
847-267-2027
knoxth@cch.com
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers



This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:51 EDT