From: kim lee (searomiya@yahoo.com)
Date: Thu Jul 24 2003 - 12:39:20 EDT
I was a missing a patch 108725-13 addresses the hp's
st.conf and st driver.
thanks Charlotte and other ppl who contributed.
To: sunmanagers@sunmanagers.org
Subject: LTO GEN2 L180
I have currently scsi3(X6758,
sun part#375-3057) hba
connects L180 tape drives (4 HP
LTO GEN2). robot is
connect to E420 on board se. at
the ok promt, I can
run probe-scsi-all and see all
the tape drives. if I
run sgscan, I can't not see any
drive at run level 3.
I also put tapes in the drive
and use mt command, it
shows "HP Ultrim 2-scsi" I am
assuming sol8 reconize
lto gen 2. why veritas netbackup
can't see the tape
drive(s)?
netbackup 4.5 FP3.
__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:48 EDT