From: Scott Ruffner (jpr9c@cs.virginia.edu)
Date: Wed Jul 16 2003 - 10:23:31 EDT
I've got some older tape libraries/robots I'd like to connect to my SAN -
they are all LVD/SE devices, and I'd like to use the ATTO 2300R bridge -
I've got the QLA2212 HBA's in some Suns and PCs and they are connected via
a Qlogic Sanbox-8 switch. Has anyone got experience with accessing tape
devices via ATTO bridges? Are there other FC Bridges that folks would
recommend.
I attempted (unsuccessfully) to bring the tape devices up (Robots) using
multiple LUN support behind an older HP SureStore bridge, but that bridge
does not support LUN mapping.
Thanks,
Scott
==================================================================
Scott Ruffner
Computer Systems Senior Engineer Computer Science Department
ruffner@cs.virginia.SPAM.EDU University of Virginia
(434)982-2219 http://www.cs.virginia.edu/~jpr9c
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:46 EDT