Fibre warnings

From: Bruno Bossier (bruno.bossier@erudict.com)
Date: Tue Jul 15 2003 - 11:08:30 EDT


WARNING: qlc(1) Loop ID is now reassigned; old pairs: [21700, 2] and
[21100, 0]
; new pairs: [21700, unknown] and [21100, 2]
WARNING: qlc(1) Loop ID is now reassigned; old pairs: [21500, 2] and
[21100, 0]
; new pairs: [21500, unknown] and [21100, 2]
WARNING: qlc(1) Loop ID is now reassigned; old pairs: [21300, 2] and
[21100, 0]
; new pairs: [21300, unknown] and [21100, 2]
WARNING: qlc(1) Loop ID is now reassigned; old pairs: [21600, 2] and
[21100, 0]
; new pairs: [21600, unknown] and [21100, 2]

Does anyone know what the meaning is of this ?

I finally managed to configure the Clariion correctly and configured a
number of lun's. However, I'm still don't see the disks on my Solaris
node. I installed the SUNWsan package and following patches : 113039-03,
113040-05, 113041-03, 113042-04 and 113046-01. My sd.conf file is also
adapted, so that should not be the issue.

And a last question. When I run prtdiag, I get the following information
on the fibre card :

                                   Bus Max
        IO Port Bus Freq Bus Dev,
Brd Type ID Side Slot MHz Freq Func State Name
Model
---- ---- ---- ---- ---- ---- ---- ---- -----
-------------------------------- -------------------
I/O PCI 8 A 1 66 66 1,0 ok
SUNW,qlc-pci1077,2200.1077.4082.+

How can I translate this into a model code like e.g. X6727A or X6768A,
.... ?

Please reply privately as I don't automatically receive the mails from
SUN managers.

Thanks,
Bruno
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers



This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:45 EDT