gigabit interface error

From: jun aquino (thepallace@yahoo.com)
Date: Tue Jul 08 2003 - 17:43:05 EDT

• Next message: Oscar Ramos Peralta: "Panic messages"
• Previous message: Mark_A_Khan@raytheon.com: "Jumpstart mounting of boot disk partitions"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

I'm getting this error when I try to configure the E220R server to a gigabit interface. Do I need to install the driver for the gigabit interface? What package do I need to install. Pls advise. Error shows below.
 

WARNING: Cannot create minor node for <JNI,FCE> <jnic> <0>

Can't find clone devinfo node

jnic0: Hba: JNI,FCE Model: FCE-6410

jnic0: FCode: Version 3.8.9 [FADD]

jnic0: IRQ: 1 Channel: 1

jnic0: SubVend: 1242 Sub: 4645 Rev: 400 Vend: 9004 Dev: 1160

jnic0: WWNN: 100000E069F186C8 WWPN: 200000E069F186C8

jnic0: Configured as Private Loop port

jnic0: Loss of sync detected

jnic0: JNIC v4.1.5 (03021000)

jnic0: Copyright(c) 1995-2002 JNI Corp, All Rights Reserved.

Thanks,
JA
SBC Yahoo! DSL - Now only $29.95 per month!
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

• Next message: Oscar Ramos Peralta: "Panic messages"
• Previous message: Mark_A_Khan@raytheon.com: "Jumpstart mounting of boot disk partitions"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:43 EDT