From: wen@bs2.qnes.nec.co.jp
Date: Wed Jul 02 2003 - 03:48:06 EDT
Hello,
Thanks to Jacob Lerner, the problem has been solved by his
suggestion as follows,
yakov.lerner> Reenter the 'map g ...' line. Don't type
yakov.lerner> ^ and [ where you want ESCa[. Press Ctrl-V and Ctrl-[
Cheers,
--Wen
yakov.lerner>
yakov.lerner> Then , check contents of ~/.exrc using 'od -c'
yakov.lerner>
yakov.lerner> Correct 'od -c ~/.exrc' shall look like this:
yakov.lerner>
yakov.lerner> % od -c ~/.exrc
yakov.lerner> 0000000 m a p g I / * 033 A * / 033
yakov.lerner> 0000020 \n
yakov.lerner> 0000021
yakov.lerner>
yakov.lerner> OK ?
yakov.lerner>
yakov.lerner> Jacob Lerner
yakov.lerner>
yakov.lerner>
yakov.lerner> wen@bs2.qnes.nec.co.jp wrote:
yakov.lerner> > Hello,
yakov.lerner> > I am using vi in Solaris8 from a remote box by telnet.
yakov.lerner> > I set a mapping such as,
yakov.lerner> > map g I/* ^[A */^[
yakov.lerner> > But when I push key g in command mode "/* ^[A */^["
yakov.lerner> > is inserted. ESCape sequence "^[" does not work.
yakov.lerner> > The output of the ESCape key by #od -c is ^[ .
yakov.lerner> > What is wrong with it?
yakov.lerner> > Thanks in advance.
yakov.lerner> >
yakov.lerner> > --Wen
yakov.lerner> > _______________________________________________
yakov.lerner> > sunmanagers mailing list
yakov.lerner> > sunmanagers@sunmanagers.org
yakov.lerner> > http://www.sunmanagers.org/mailman/listinfo/sunmanagers
yakov.lerner> >
yakov.lerner>
yakov.lerner>
yakov.lerner> --
yakov.lerner> Jacob Lerner
yakov.lerner>
yakov.lerner> % echo 'scale=80; a(1)*4' | bc -l
yakov.lerner> --
yakov.lerner>
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:41 EDT