From: Hardy, Andy (ahardy@cellops.com)
Date: Thu Jun 26 2003 - 08:34:20 EDT
When I try & "boot net - install" the jumpstart client, the
installation on the client, is not non-interactive.
Does anyone have any idea whether there is something wrong with my
configuration, or is there a trick that I have missed, to allow for a
non-interactive client install ?
I have built one server (hostname "white"), to be the boot, install
& config server.
I have populated the relevant files with the clients details. ie.
/etc/hosts & /etc/ethers.
The server is running Solaris 8 & has the latest patch cluster
installed.
The clients name is "firewall_new"
After running the add_install_client script as follows:
./add_install_client -e <MAC address of client> -i <IP address of client> -s
white:/scratch/jumpstart_images/firewall01 -c
white:/scratch/jumpstart_images/firewall01 -p
white:/scratch/jumpstart_images/firewall01/sysidcfgdir
firewall_new.cellops.com sun4u
I get the following output:
cleaning up preexisting install client "firewall_new"
removing firewall_new from bootparams
removing /etc/bootparams, since it is empty
removing /tftpboot/inetboot.SUN4U.Solaris_8-1
updating /etc/bootparams
copying inetboot to /tftpboot
I run the check script & get a rules.ok file in return
All the relevant files seem to be ok:
/etc/bootparams
firewall_new
root=white:/scratch/jumpstart_images/firewall01/Solaris_8/Tools/Boot
install=white:/scratch/jumpstart_imag
es/firewall01 boottype=:in
sysid_config=white:/scratch/jumpstart_images/firewall01/sysidcfgdir
install_config=white:/scr
atch/jumpstart_images/firewall01 rootopts=:rsize=32768
sysidcfg file
# sysidcfg file for firewall installs #
timezone=GB
timeserver=localhost
system_locale=en_GB
name_service=OTHER {domain_name=cellops.com name_server=<DNS
server>.cellops.com(<IP address>)}
network_interface=primary {hostname=firewall_new ip_address=172.16.128.130
netmask=255.255.240.0 protocol_ipv6=no default_route=<IP address of default
route>}
root_password=8N3tfXD96hH5R
security_policy=NONE
terminal=vt100
timezone=GB
firewall_class
# Configuration of default firewall installation #
install_type initial_install
system_type standalone
partitioning explicit
filesys c0t0d0s0 2048 /
filesys c0t0d0s1 1024 /swap
filesys c0t0d0s3 1024 /var
filesys c0t0d0s7 10 /unassigned
cluster SUNWCXall add
package SUNWadm5u add
package SUNWadm5r add
package SUNWsadmc add
package SUNWsadmo add
package SUNWsadml add
package SUNWadmsm add
package SUNWmd add
package SUNWmdg add
package SUNWmdn add
I have searched high & low for ideas of how to fix this problem, before
posting this message.
Your help would be very much appreciated
Andy
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:39 EDT