From: Reiss David IT751 (ext-CDI) (david.reiss@siemens.com)
Date: Wed Jun 25 2003 - 14:15:28 EDT
Hello,
We have a F6800 hooked up to a SAN environment and it has six tape drives
defined as local devices (/dev/rmt/rmt0...5) on the box now. But the
software we use for our backups (Tivoli Storage Manager) needs to have the
devices defined on the server side to the match the definitions on the
F6800.
The problem is this... they don't appear to match up properly when Solaris
configures them. So, I would like to know a Solaris command that could list
the WWN of the tape drive on the F6800. Then, I could match that with the
TSM Server WWN's and make the definitions I need.
I know that I could get this info from rebooting the F6800, but that doesn't
seem like a good way to get this info, as Solaris should be able to tell me
what they are itself... I would think.
Thank you,
David N. Reiss
TSM Support Engineer/Unix Systems Engineer
david.reiss@siemens.com
407-736-3912
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:39 EDT