From: neil d quiogue (neil@quiogue.com)
Date: Fri Jun 13 2003 - 23:55:21 EDT
Hello,
I had a problem on a StorEdge T3 not getting an IP address from a rarpd server (after configuring necessary files, of course). These devices were connected to a cisco switch. I had enabled debug messages (-d) on the in.rarpd but it was not getting any rarp request from the T3.
Furgus Donahue noted 'portfast' which was listed in the Release Notes of the StorEdge T3.
http://sunsolve.sun.com/data/816/816-4107/pdf/816-4107-10.pdf
So one just need to enable the 'spanning-tree portfast' on the concerned port and it worked.
Regards, Neil
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:35 EDT