From: Lin Feng (linlifeng@yahoo.com)
Date: Thu May 09 2002 - 09:33:06 EDT
Hi,
One of my D1000 drives is unformated. I got the following message when I tried to format it using 'format':
------------------------------------------------------------------
fmrmat> c
Current Disk = c2t9d0
<COMPAQ-BD00911934-3B02 cyl 5271 alt 2 hd 20 sec 168>
/pci@1f,4000/scsi@2/sd@9,0
format> rep
Current Disk is unformatted.
format> for
Ready to format. Formatting cannot be interrupted.
Continue? y
Beginning format. The current time is Thu May 9 08:58:09 2002
Formatting...
Format failed
Retry of formatting operation without any of the standard
mode selects and ignoring disk's Grown Defects list. The
disk may be able to be reformatted this way if an earlier
formatting operation was interrupted by a power failure or
SCSI bus reset. The Grown Defects list will be recreated
by format verification and surface analysis.
Retry format without mode selects and Grown Defects list? y
Formatting...
Not ready error during format
ASC: 0x4 ASCQ: 0x0
failed
format>
-------------------------------------------------------------
Does this mean the drive itself is bad? Or these is something else I can do. The led for this is drive on the the D1000 is green. Any help is appreciated.
Thanks,
Lin
Yahoo! Shopping - Mother's Day is May 12th!
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:18 EDT