From: egold@fsa.com
Date: Sun Jun 08 2003 - 22:52:48 EDT
I am trying to jumpstart an E250 using a flash archive.
I tried 3 different flash archives and keep getting this error.
This machine has a bad disk but that is c0t11 and im installing to c0t0.
{0} ok boot net - install
Resetting ...
Sun (TM) Enterprise 250 (2 X UltraSPARC-II 400MHz), No Keyboard
OpenBoot 3.28, 1024 MB memory installed, Serial #12847200.
Ethernet address 8:0:20:c4:8:60, Host ID: 80c40860.
Rebooting with command: boot net - install
Boot device: /pci@1f,4000/network@1,1 File and args: - install
Timeout waiting for ARP/RARP packet
SunOS Release 5.8 Version Generic_108528-13 64-bit
Copyright 1983-2001 Sun Microsystems, Inc. All rights reserved.
whoami: no domain name
Configuring /dev and /devices
ip_rput_dlpi(fcip0): DL_ERROR_ACK for DL_ATTACH_REQ(11), errno 14, unix 0
ip_rput_dlpi(fcip0): DL_ERROR_ACK for DL_BIND_REQ(1), errno 3, unix 0
ip_rput_dlpi(fcip0): DL_ERROR_ACK for DL_PHYS_ADDR_REQ(49), errno 3, unix 0
ip_rput_dlpi(fcip0): DL_ERROR_ACK for DL_UNBIND_REQ(2), errno 3, unix 0
ip_rput_dlpi(fcip0): DL_ERROR_ACK for DL_DETACH_REQ(12), errno 3, unix 0
Using RPC Bootparams for network configuration information.
SUNW,hme1 : No response from Ethernet network : Link down -- cable problem?
Skipping interface hme1
Configured interface hme0
Searching for configuration file(s)...
Using sysid configuration file
2.0.73.35:/jumpstart/Sysidcfg/Solaris_8/sysidcfg
The system is coming up. Please wait.
Starting remote procedure call (RPC) services: sysidns done.
Starting Solaris installation program...
Searching for JumpStart directory...
Using rules.ok from 2.0.73.35:/jumpstart.
Checking rules.ok file...
Using begin script: Begin/S65all100fdx.beg
Using profile: Profiles/flash
Using finish script: Finish/flash.fin
Executing JumpStart preinstall phase...
Executing begin script "Begin/S65all100fdx.beg"...
Begin script starting at Saturday June 7 17:59:37 EDT 2003
S65all100fdx - Attempting to set hme0 to 100fdx...
SETTINGS FOR hme0
Link_status: 1
Link_speed: 1
Link_mode: 1
Autoneg: 0
100fdx: 1
100hdx: 0
10fdx: 0
10hdx: 0
S65all100fdx - Attempting to set hme1 to 100fdx...
SETTINGS FOR hme1
Link_status: 0
Link_speed: 1
Link_mode: 1
Autoneg: 0
100fdx: 1
100hdx: 0
10fdx: 0
10hdx: 0
Begin script Begin/S65all100fdx.beg execution completed.
Searching for SolStart directory...
Checking rules.ok file...
Using begin script: install_begin
Using finish script: patch_finish
Executing SolStart preinstall phase...
Executing begin script "install_begin"...
Begin script install_begin execution completed.
WARNING: /pci@1f,4000/scsi@3/sd@b,0 (sd10):
offline
Processing default locales
- Specifying default locale (en_US)
Processing profile
- Opening Flash archive
- Validating Flash archive
WARNING: Unknown identification section keywords found:
- creation_node
- creation_hardware_class
- creation_platform
- creation_processor
- creation_release
- creation_os_name
- creation_os_version
These keywords will be ignored.
- Selecting all disks
- Configuring boot device
- Configuring swap (c0t0d0s1)
- Configuring / (c0t0d0s0)
- Deselecting unmodified disk (c0t8d0)
- Deselecting unmodified disk (c0t9d0)
- Deselecting unmodified disk (c0t10d0)
- Deselecting unmodified disk (c0t11d0)
- Deselecting unmodified disk (c0t12d0)
Verifying disk configuration
Verifying space allocation
Arithmetic Exception - core dumped
#
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:33 EDT