SUMMARY: E250 rackmount kit specs?

From: Bill Bradford (mrbill@mrbill.net)
Date: Fri Jun 06 2003 - 12:41:00 EDT


On Fri, Jun 06, 2003 at 11:12:25AM -0500, Bill Bradford wrote:
> I need to know the specs of the screws/nuts/washers that come with an
> E250 rackmount kit, ASAP.

Dug a little depper, and found the info in the system handbook.

Sun E250 Rack Mount Installation Manual
http://sunsolve.sun.com/data/805/805-3611/pdf/805-3611-12.pdf

- #10 Flathead screw (2)
- #10 SEMS Panhead screw (14)
- M4 SEMS Panhead screw (20)
- M4 KEPTS nut (14)

> Need the same info (if its not the same hardware) for the rails on a
> SunFire 280R as well.

Sun Fire 280R Server Setup and Rackmounting Guide
http://sunsolve.sun.com/data/806/806-4805/pdf/806-4805-11.pdf

- 10-32x3/4 Screws (8)
- B-32 Flat Washers (8)
- B-32 Locking Nuts (?)

Bill

-- 
bill bradford
mrbill@mrbill.net
austin, texas
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers


This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:33 EDT