From: Bill Bradford (mrbill@mrbill.net)
Date: Fri Jun 06 2003 - 12:12:25 EDT
I need to know the specs of the screws/nuts/washers that come with an
E250 rackmount kit, ASAP.
I've got two systems currently mounted in a Sun-branded cabinet (so the
rackmount rails use the pre-set, pre-drilled holes in the rails), but need to
move them into a non-Sun cabinet, so I need to do the "bolt and nut and
lock washer" thing so I can adjust the rails for the depth of the cabinet.
I need the specs so I can go buy equivalent parts at Home Depot...
Need the same info (if its not the same hardware) for the rails on a
SunFire 280R as well.
Thanks.
Bill
-- bill bradford mrbill@mrbill.net austin, texas _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:33 EDT