From: neil quiogue (neil@quiogue.com)
Date: Wed Jun 04 2003 - 14:27:13 EDT
Hello,
I just got an E220R and I'm using the console cable I use for the Netra
T1s with an additional RJ45-DB25 adapter with the following pins
enabled: 2,3,4,5,7,8,20. This is connected to Serial A of the E220R.
And my setup is 9600-8-N-1 in the terminal. The console cable works on
a Netra T1 so it's verified to work.
And yet I'm not able to see anything on the E220R through the console.
I've followed the instructions on the doc.sun.com website but to no
avail. Any tips?
Regards, Neil
Regards,
Neil D. Quiogue
Technical Operations
telic.net
Email neil@telic.net
United States Voice (201) 6564433 (ext. 1110)
Fax (201) 2218305
Philippines Voice (632) 7473460
Fax (632) 6871331
"Information and attachments herein are intended for the named
recipients only. It may contain attorney-client privileged or
confidential matter. If you have received this message in error,
please notify the sender immediately, and destroy the original
message. Do not disclose the contents to anyone. Thank you."
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:32 EDT