From: Helen Nulty (hnulty@email.unc.edu)
Date: Fri May 30 2003 - 08:37:08 EDT
We have a Minolta DiALTA Di650 printer/copier/scanner with the Pi6500
Pro print controller option based on Fiery X3 technology.
We want to print to this printer from solaris (2.8). Has anyone done
this and willing to share their configuration?
I have created the printer using lpadmin like so:
Banner: off
Content types: any
Device: /dev/null
Interface: /usr/lib/lp/model/netstandard
Printer type: unknown
Modules:
Options: dest=ro401mn6500.sph.unc.edu:text,protocol=bsd
I sent a test job with these results:
# lpstat -p ro401mn6500
printer ro401mn6500 waiting for auto-retry. available.
exec exit fault
# lpq -P ro401mn6500
Warning: ro401mn6500 is down: exec exit fault
Rank Owner Job File(s) Total Size
1st root 1345 PrintTest 361 bytes
Thanks for any help you can provide.
Helen
[demime 1.01b removed an attachment of type text/x-vcard which had a name of hnulty.vcf]
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:30 EDT