From: Parkins, Larye (NIH/NIAID) (LParkins@niaid.nih.gov)
Date: Wed May 28 2003 - 12:11:56 EDT
This says it all, thanks to Tom Crummey for a quick response.
The PCI3 card doesn't work in the Ultra5/10. It needs the 64bit PCI slot. We
tried it and it doesn't even power up.
Original post:
Has anyone installed a SunPCi3 in an older machine, i.e., Ultra 5 or Ultra
10?
We had plans to install a SunPCi2 in an Ultra 10, but Sun is now shipping
SunPCi3, and the U/10 dropped off the hardware compatibility list in the
release notes.
The immediate differences I see are that version 3 has an additional
daughterboard for extra USB and firewire ports, so it takes up three PCI
slots with all options installed instead of two slots.
We have a Plan B, which involves moving around existing SunPCi2 cards and
reassigning workstations, but my clients are looking for a second opinion
before approving.
Questions:
1) physical fit of main board, daughterboard, and serial/parallel connector
(if used).
2) firmware compatibility, i.e., if you have installed, what version of OBP
firmware do you have?
3) power consumption/cooling considerations
Will summarize.
-- Larye D. Parkins Systems Administrator, RML - NIAID 903 S. 4th St., Hamilton, MT 59840 (406) 363-9433 _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:29 EDT