From: Pete (pete@peteland.org)
Date: Thu May 22 2003 - 06:49:06 EDT
Good morning, managers.
I've got an ultra 2 that is halting. Without any errors (none that I can
find, anyway). When it halts, the only way to bring it back is to power
cycle it. Nothing else works, including stop-a. I looked in the log
files for something and can't find a thing. The OS is Solaris 9. Here is
the output of the prtdiag:
System Configuration: Sun Microsystems sun4u Sun Ultra 2 UPA/SBus (2 X
UltraSPARC 168MHz)
System clock frequency: 84 MHz
Memory size: 1152 Megabytes
========================= CPUs =========================
Run Ecache CPU CPU
Brd CPU Module MHz MB Impl. Mask
--- --- ------- ----- ------ ------ ----
0 0 0 168 0.5 US-I 2.2
0 1 1 168 0.5 US-I 2.2
========================= IO Cards =========================
Bus Freq
Brd Type MHz Slot Name Model
--- ---- ---- ---------- ----------------------------
--------------------
0 SBus 25 14 SUNW,fas/sd (block)
0 SBus 25 14 SUNW,hme
0 SBus 25 14 SUNW,bpp
ERROR: Cannot determine PCI device type.
0 UPA 84 30 FFB, Single Buffered SUNW,501-2634
No failures found in System
===========================
What does that ERROR mean above? Would that somehow be connected to the
system failing? Any ideas how I can find out what is happening here?
Thanks in advance!
- Peter
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:27 EDT