From: Tim Moran (tmoran@shutterfly.com)
Date: Tue May 07 2002 - 17:28:28 EDT
Thanks for the immediate feedback, got me up a going already!
The issue is that in.rarpd -a runs at boot time (/etc/rc3.d/S15nfs.server).
When the boot server was booted, the interface didn't exist (I brought it up
later).
Running in.rarpd -a again made the world happy.
Thanks again.
Tim
> -----Original Message-----
> From: Tim Moran
> Sent: Tuesday, May 07, 2002 2:07 PM
> To: 'sunmanagers@sunmanagers.org'
> Subject: Jumpstart boot server issues on second network interface.
>
> I have a functioning boot server (that is, I've successfully jumpstarted
> servers using hme0) that I am attempting to use the second interface, for
> a different network.
>
> I have brought up the interface and it is functioning well, I've added an
> entry in /etc/hosts and /etc/hostname.hme1, etc. The add_install_client
> accepts the arguments, and /etc/bootparams, /etc/ethers and /etc/hosts
> look good, etc.
>
> Snooping the second interface (snoop -d hme1) you can see the RARP go by,
> but the boot server never responds. I've removed and re-added the client
> multiple times, no response on hme0 either (that is, the boot server does
> not attempt to respond to the hme1 RARP on hme0).
>
> Any thoughts on why the second interface would not work for a boot server?
>
> Tim Moran
> tmoran@shutterfly.com
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:18 EDT