From: Andy.Kannberg@lgphilips-displays.com
Date: Tue May 20 2003 - 10:41:54 EDT
Guru's
a little confusion here.....
I need to add a hotspare for a RAID 5 diskset under Solstice.
from the RAID5 disks, only s0 is configured (plus s7 for metadb's)
The manual is a little confusing when it comes to initializing the
hotspare.
It says to use slice 2 (whole disk!), while in the standard md.tab
exemples, I see that s0 is used.
What SHOULD I use ?? s0 or s2 or both ??
met vriendelijke groet,
Andy Kannberg
System Engineer
SPIRIT UNIX group
LG Philips Displays Eindhoven
The Netherlands
tel: 040 - 2789265
fax: 040 - 2785405
email: Andy.Kannberg@LGPhilips-Displays.com
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:26 EDT