From: Tavalvarez@aol.com
Date: Mon May 19 2003 - 20:04:59 EDT
To Sun Gurus:
We have two qlogic cards installed on one of our host connected to our EMC
storage. The problem is one is configured and set to link mode, the other is
set to loop mode. Does anyone know how to set or configure these qlogic
cards. We need them both set to loop mode.
Thanks in advance,
Octavio
May 18 03:38:55 qla2200: [ID 348372 kern.notice] qla2200(0): Link Up.
May 18 03:50:47 qlc: [ID 686697 kern.info] NOTICE: Qlogic qlc(1): Link ONLINE
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:26 EDT