From: Levent Demiroers (levent@kaa.desy.de)
Date: Mon May 19 2003 - 11:54:58 EDT
Dear Managers,
I'd like to thank
Darren Dunham
Rene Casalme
Juergen Waiblinger
for their answers in this matter.
There were several issues/misunderstandings on my side that let to the post in
the first place. After reading the answers on my post and thinking a little I
got it working:
1) Of course I forgot to edit /kernel/drv7sd.conf, so when my array had
initialized the new hd's as lun1, they wouldn't show up.
2) Solaris 8 (and 9, too?) does not handle devices with more than 1TB capacity.
Even DiskSuite can't do anything about that. Since my array was slightly
above that limit, I finally reinitialized the whole array (I had made a
backup before...) and changed it into Raid5+spare, so that the final capacity
was below 1TB.
regards, Levent
Original post:
> Hi Managers,
>
> our group bought a TripleStor IDE-to-SCSI RAID system some while ago.
> We could only afford to buy 5 hd's with it, so three slots remained unused.
> That system works fine, after initialing the RAID system to RAID5, we just did
> a format/partition/newfs and mounted it....
> Just recently, we decided to buy the "missing" three hd's, they arrived a few
> days ago. After plugging them in and re-initializing the array, I have another
> LUN available....
> But now I don't know how to procede. After rebuilding the /dev and /devices
> links, the new disks to do not show up. I checked the existing partition with
> 'format', it has still the original size.
> I would like to merge both LUN's on the array, is this possible? Do I have to
> use disksuite?
---------------------------------------------------------------------
Levent Demiroers kaa.desy.de/people/Demiroers.html
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:26 EDT