From: Sunmanagers - Broadbus (sunmanagers@broadbus.com)
Date: Thu May 15 2003 - 17:00:08 EDT
I am having a problem communicating with a device via telnet. From a Sun
system, if I telnet to this device (happens to run embedded Linux)
everything I type is entered twice. For example if I type ls, lllss
actually appears. I have tried turning off echo at either end but no
luck. However if I use the CRT terminal package, I can make things work
fine if I uncheck "Will LFLOW" and check "Force character at a time
mode". Is there a way to set similar options using the stty flags?
Thanks in advance!
Sunil Mudholkar
Manager - IT
Broadbus Technologies, Inc.
(978) 264-7910
80 Central St.
Boxborough, MA 01719
--------------------------------------------------------
This email message and any files transmitted with it contain confidential
information intended only for the person(s) to whom this email message is
addressed. If you have received this email message in error, please notify
the sender immediately by telephone or email and destroy the original message
without making a copy. Thank you.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:25 EDT