From: Dave Encisco (dencisco@eos.arc.nasa.gov)
Date: Wed May 14 2003 - 17:07:49 EDT
I just attempted to move a pci Raptor monitor card (and installed the
drivers) from an Ultra 60 to a Blade 1000 and received the following
error:
Warning FCODE map-in doesn't match decoded register type.
Request I/O, Decoded Memory
Data Access Error
...and that's it, system freezes.
Does this mean that the PCI card is incompatible with a Blade? Or
could be a problem with the drivers that I've installed (may not
64-bit compatible)? Both machines are running 2.8.
Any clues would be greatly appreciated!
Thanks,
Dave
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:24 EDT