dat was rewinded when reboot the machine.

From: Sarba Jonathan E (JSARBA@pecom.com)
Date: Wed May 14 2003 - 15:31:52 EDT

Next message: egold@fsa.com: "SUMMARY: sendmail - part4 - using a different reutrn address on all outgoing mail?"
Previous message: Anshuman Kanwar: "solaris volume manager config error"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Ppl:
        I have a daily scheme of backup which uses the same
        tapes per week in two different dat.
        The subject is that today wednesday after reboot the machine,
        i4ve noticed that the tapes have been rewound.
        I could simply repair it with a "mt" during the startup,
        but it4s correct that does this?

[ before reboot ]

machine1-/tmp# mt -f /dev/rmt/0n stat
Vendor 'COMPAQ ' Product 'DLT8000 ' tape drive:
   sense key(0x0)= Unit Attention residual= 0 retries= 0
   file no= 4 block no= 0
machine1-/tmp# mt -f /dev/rmt/1n stat
Sun DLT7000 tape drive:
   sense key(0x0)= Unit Attention residual= 0 retries= 0
   file no= 4 block no= 0

[ after reboot ]

machine1-/tmp# mt -f /dev/rmt/0n stat
Vendor 'COMPAQ ' Product 'DLT8000 ' tape drive:
   sense key(0x0)= Unit Attention residual= 0 retries= 0
   file no= 0 block no= 0
machine1-/tmp# mt -f /dev/rmt/1n stat
Sun DLT7000 tape drive:
   sense key(0x0)= Unit Attention residual= 0 retries= 0
   file no= 0 block no= 0

Jonathan Emiliano Sarba
UNIX Administrator &&
IT Security Consultant.
jonathan@sarba.com.ar
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

Next message: egold@fsa.com: "SUMMARY: sendmail - part4 - using a different reutrn address on all outgoing mail?"
Previous message: Anshuman Kanwar: "solaris volume manager config error"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:24 EDT