From: RJ45 (rj45@slacknet.com)
Date: Sat May 10 2003 - 12:27:06 EDT
hello,
I replaced a 9 GB disk with a 36 GB disk on my ultra2.
now when I issue probe-scsi command the screen refreshes so fast that no
information on the console are showed about the 2 scsi disks but only
information about the CD-ROM. There is a way to reference a specific scsi
unit with probe-scsi command?
thanks
Rick
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:23 EDT