E450 - envctrl failed to load

From: Joe Serra (joe_serra@yahoo.com.br)
Date: Fri May 09 2003 - 05:52:06 EDT


Dear list,

One of our clients has a server E450 running solaris
8, patch revision 108528-15, with the problem
described bellow.

During power up, or after a reset-all command at the
ok prompt, the message below will be displayed before
getting the ok prompt:
% Device /PCI@1f,4000/ebus@1/SUNW,envctrl@14,600000
being marked with 'status' = fail

Yellow service led is on.
During the boot process a warning message will be
displayed:
Warning : envctrl failed to load.

This is an application server and some help would be
very appreciated. I will summarize to the list.

Thank you in advance and best regards,
Joe serra

_______________________________________________________________________
Yahoo! Mail
O melhor e-mail gratuito da internet: 6MB de espago, antivmrus, acesso POP3, filtro contra spam.
http://br.mail.yahoo.com/
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers



This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:22 EDT