From: McCaffity, Ray (Contractor) (McCaffityR@epg.lewis.army.mil)
Date: Tue May 07 2002 - 10:56:27 EDT
Thanks to the 2million who suggested "le0", this would have worked,
but I had to chage one other thing. Go to the OK prompt and
setenv tpe-link-test? true, reboot with a -r, bingo, it works.
Ray
================================================
>We have some "OLD" sparcstation20's that
>we were going through the AUI port to thin-net adapters
>for our network. (I know, it's ancient, but it's what we had).
>So we finally upgraded to ethernet/cat5 this week. All of these
>boxes have RJ-45 connectors on the back, but I can't seem to plumb them.
>These are the ports built-into the back on the box, not a card.
>
>I've tried, hme0, sr0, fe0, (I know they aren't qfe or ge)
>Does anyone know what the /dev/ NIC devices are? How can I find out
>what they are? Even though they are running Solaris 7, there is no
>prtdiag or prtconfig command.
>
>Ray
>_______________________________________________
>sunmanagers mailing list
>sunmanagers@sunmanagers.org
>http://www.sunmanagers.org/mailman/listinfo/sunmanagers
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:18 EDT