From: egold@fsa.com
Date: Thu May 08 2003 - 12:10:20 EDT
Has anyone seen anything like this ever?
My new jumpstart client keeps rebooting in the middle of the jumpstart,
it will be installing some packages and right in the middle of that it will
reboot and ruin the install.
any ideas?
here is a screen shot of the problem, it reboots in the middle of
installing "sudo"
.
.
.
/a/usr/local/samba/swat/using_samba/figs/sam.0904.gif
/a/usr/local/samba/swat/using_samba/figs/sam.0905.gif
/a/usr/local/samba/swat/using_samba/figs/sam.aa01.gif
/a/usr/local/samba/swat/using_samba/figs/sam.ab01.gif
/a/usr/local/samba/swat/using_samba/figs/sam.ab02.gif
/a/usr/local/samba/swat/using_samba/gifs/index.gif
/a/usr/local/samba/swat/using_samba/gifs/samba.s.gif
/a/usr/local/samba/swat/using_samba/gifs/txthome.gif
/a/usr/local/samba/swat/using_samba/gifs/txtnexta.gif
/a/usr/local/samba/swat/using_samba/gifs/txtpreva.gif
/a/usr/local/samba/swat/using_samba/index.html
/a/usr/local/samba/swat/using_samba/inx.html
/a/usr/local/samba/swat/using_samba/licenseinfo.html
/a/usr/local/samba/swat/using_samba/this_edition.html
[ verifying class <none> ]
Installation of <SMCsamba> was successful.
The following packages are available:
1 SMCsamba samba
(sparc) 2.2.8a
Select package(s) you wish to process (or 'all' to process
all packages). (default: all) [?,??,q]:
Processing package instance <SMCsamba> from
</a/mnt/samba-2.2.8a-sol8-sparc-local.gz>
sudo
(sparc) 1.6.6
Todd Miller
Using </a/usr/local> as the package base directory.
## Processing package information.
## Processing system information.
5 package pathnames are already properly installed.
Installing sudo as <SMCsudo>
## Installing part 1 of 1.
/a/usr/local/bin/sudo
/a/usr/local/doc/sudo/BUGS
/a/usr/local/doc/sudo/CHANGES
/a/usr/local/doc/sudo/HISTORY
/a/usr/local/doc/sudo/INSTALL
/a/usr/local/doc/sudo/INSTALL.configure
/a/usr/local/doc/sudo/LICENSE
/a/usr/local/doc/sudo/Makefile
/a/usr/local/doc/sudo/Makefile.in
/a/usr/local/doc/sudo/PORTING
/a/usr/local/doc/sudo/README
/a/usr/local/doc/sudo/RUNSON
/a/usr/local/doc/sudo/TODO
/a/usr/local/doc/sudo/TROUBLESHOOTING
/a/usr/local/doc/sudo/UPGRADE
/a/usr/local/doc/sudo/sample.pam
/a/usr/local/doc/sudo/sample.sudoers
/a/usr/local/doc/sudo/sample.syslog.conf
/a/usr/local/doc/sudo/sudo.man
/a/usr/local/doc/sudo/sudo.pod
/a/usr/local/doc/sudo/sudoers.man
/a/usr/local/doc/sudo/sudoers.pod
/a/usr/
Resetting ...
screen not found.
keyboard not found.
Keyboard not present. Using ttya for input and output.
Sun Fire 280R (2 X UltraSPARC-III+) , No Keyboard
Copyright 1998-2002 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.5, 2048 MB memory installed, Serial #53055002.
Ethernet address 0:3:ba:29:8e:1a, Host ID: 83298e1a.
Rebooting with command: boot
Boot device: /pci@8,600000/SUNW,qlc@4/fp@0,0/disk@w500000e010230a91,0:a
File and args:
SunOS Release 5.8 Version Generic_108528-13 64-bit
Copyright 1983-2001 Sun Microsystems, Inc. All rights reserved.
configuring IPv4 interfaces: eri0.
Hostname: psoftdr
Configuring /dev and /devices
thanks in advance!!
Evan Gold
egold@fsa.com
FSA
212.893.2762
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:22 EDT