From: Biagio De Giovanni (biagio.degiovanni@email.it)
Date: Thu May 08 2003 - 11:51:01 EDT
Hi
I have the following problem:
I made a jumpstar on a workstation (ultra 10). Before it was working well with
no problem on another server.
After It finshed to jumpstart, at the reboot I had the following message:
"
Restoring the System. Please wait...... cpr_reset_properties: Unable to open
/.cpr_default on /pci@1f,0/pci@1,1/ide@3/disk@0,0:a.
cprboot: cannot read saved nvram info, please reboot.
Program terminated.
"
The only way to boot is in single user mode.
Dows anyone have an idea on what could be the problem?
thanks
Biagio
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:22 EDT