From: durgads@charteredsemi.com
Date: Tue May 06 2003 - 05:29:11 EDT
Hi Guru`s,
Que 1) Today I replace c0t0d0s7 and resyc done for OS mirror in SDS 6.2.
Here my question is how can i get increase number of metdevice in c0t2d0s7.
I have tried with below coomand
#metadb -a -c 3 c0t2d0s2 , but not allowing and scaring becz of having only
one master metaDB
#metadb
flags first blk block count
a m p luo 16 1034 /dev/dsk/c0t2d0s7
a u 16 1034 /dev/dsk/c0t0d0s7
a u 1050 1034 /dev/dsk/c0t0d0s7
a u 2084 1034 /dev/dsk/c0t0d0s7
Que 2) How can I change boot device
Old bood device :
#eeprom |grep boot
root-device=/sbus@2,0/SUNW,socal@d,10000/sf@0,0/ssd@w21000020374fb796,0 ,
This disk has been replaced and its path is =
bus@2,0/SUNW,socal@d,10000/sf@0,0/ssd@w21000020372b3725,0.
Please let me know how can i change the boot file path NVRAM and how can i
increase master metadb coppies.
Thanks,
Shanker.
[This e-mail is confidential and may also be privileged. If you are not the
intended recipient, please delete it and notify us immediately; you should
not copy or use it for any purpose, nor disclose its contents to any other
person. Thank you.]
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:21 EDT