From: Dhiraj Hegde (dhegd0@yahoo.com)
Date: Fri May 02 2003 - 17:58:35 EDT
I have PowerPath 3.0 installed on Solaris 2.6 and 2.8
machines with two HBAa. The machines are connected
through a fabric to symmetric and clariion boxes. I am
carrying out the following step
1) Provision a symmetrix volume using VolumeLogix
2) Get OS to recognize the volume (using
drvconfig;disks on 2.6 and devfsadm on 2.8). This
works fine. I can see the volume using "fpath
lshostdev"
3) Now I release the same volume and provision it
again (to the same host). This time I cannot see the
volume.
The important thing to note here is that I did not
reconfigure PowerPath to recognize the volume at any
time (since I did not want to use PowerPath for this
volume).
Has anyone else seen this Problem ?
Thanks,
DH
__________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo.
http://search.yahoo.com
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:20 EDT