From: Glenn, May (COMFIN, VFS, Consultant) (may.glenn@gecapital.com)
Date: Fri May 02 2003 - 11:28:39 EDT
Good afternoon everyone,
I have recently been handed a bunch of Sun Storedge equipment that my manager
would like me to get running. They are all SUN Raid modules. A1000, A3500, and
A1500fc raid controllers.
The problem is that over the time they have been dormant, the drives have been
taken out, replaced with different ones, etc.. The raid controller will not
talk to me in any way shape or form. I have tried every trick that I know of,
new drives, first striping column, etc..
What I am wanting to do is access the serial port on the rear of the
controllers so that I can hard reset the data. There is no concern over saving
what is on these devices.
If anyone can tell me the pin-outs of the LSI Logistics board serial, or
Ethernet port, as well as the commands needed after tipping in I would
definitely appreciate it..
Thank you in advance for your time.
Glenn May
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:20 EDT