From: Robert L. Harris (Robert.L.Harris@rdlg.net)
Date: Fri May 03 2002 - 19:03:28 EDT
Just built out a Solaris 8 server. Installed DiskSuite. Created all my
metadb's (2 per disk, 2 disks in the machine). Created devices db10-14
and 20-24. d10+d20=d1 (root mirror), etc.
I can reboot the box just fine, all mirrors synced, etc.
Init 0, remove c0t0, move c0t1 to the slot for c0t0. Insert a new disk
in c0t1 (pretending my c0t0 disk died).
ok boot -s
Can't open input device.
Keyboard not present. Using ttya for input and output.
Sun Enterprise 420R (2 X UltraSPARC-II 450MHz), No Keyboard
OpenBoot 3.29, 1024 MB memory installed, Serial #12950609.
Ethernet address 8:0:20:c5:9c:51, Host ID: 80c59c51.
Boot device: disk:a File and args:
boot: cannot open kernel/sparcv9/unix
Enter filename [kernel/sparcv9/unix]:
boot: cannot open kernel/sparcv9/unix
Enter filename [kernel/sparcv9/unix]:
I did install the bootblock on the root disk when it was c0t1.
Thoughts?
:wq!
---------------------------------------------------------------------------
Robert L. Harris | Micros~1 :
Senior System Engineer | For when quality, reliability
at RnD Consulting | and security just aren't
\_ that important!
DISCLAIMER:
These are MY OPINIONS ALONE. I speak for no-one else.
FYI:
perl -e 'print $i=pack(c5,(41*2),sqrt(7056),(unpack(c,H)-2),oct(115),10);'
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:17 EDT