From: Caparroso, Nelson T. (AAS) (Nelson.T.Caparroso@sbcdo.com)
Date: Thu Apr 25 2002 - 11:07:08 EDT
V880, Solaris 8, VxVM 3.2
This V880 has 1 base backplane with 6 disks and was purchased with a Sun
StorEdge PCI dual FC card (QLA2200?/X6727?). I'd like to use port A to dual
path my internal disks and to use the other port (B) to connect fabric-wise
to my tape library. One of you recommended I use QLOGIC's driver QLA2200-3
which I did and got the following proof that the driver is indeed
recognizing the 3 instances - the on-board plus the two ports on the card
itself:
qla2200-hba0-adapter-node-name="200100e08b241954";
qla2200-hba1-adapter-node-name="200000e08b041954";
qla2200-hba2-adapter-node-name="200000e08b000000";
qla2200-hba2-SCSI-target-id-0-fibre-channel-name="21000004cf449d0c";
qla2200-hba2-SCSI-target-id-1-fibre-channel-name="21000004cf449f57";
qla2200-hba2-SCSI-target-id-2-fibre-channel-name="21000004cf449cd2";
qla2200-hba2-SCSI-target-id-3-fibre-channel-name="21000004cf449ddf";
qla2200-hba2-SCSI-target-id-4-fibre-channel-name="21000004cf449e05";
qla2200-hba2-SCSI-target-id-5-fibre-channel-name="21000004cf449e2b";
qla2200-hba2-SCSI-target-id-6-fibre-channel-name="50800200001877d9";
in my /var/adm messages file
Apr 24 21:55:24 tdcsnxte007 qla2200: [ID 379160 kern.notice] QLogic qla2200
Fibre Channel Driver v3.16 Instance: 0. Firmware v2.1.34.
Apr 24 21:55:32 tdcsnxte007 qla2200: [ID 348372 kern.notice] qla2200(0):
Link Up .
Questions:
My sd.conf is properly setup, I added persistent binding entries in my
qla2200.conf but I cannot see the disks in format or inquire. Would any of
you be kind enough to give me a sample of how your qla2200.conf might look
like and how I configure 1 port for loop and the other port for fabric?
I will summarize.
Thanks.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:15 EDT